In the first part of this project, we want to discuss how to get started in making a bell from the marker windows to the structure glues together. The steps we deal with in the first part, only the base in preparation for the second part, which is more of the painting and beautifying the bell tower. With further, this is the continuation of the clock tower project. So do not worry as in the last article of your project is not complete. Let’s start with the work done by
Step 1 Cut out base
After trimming the windows that you are going to cut a base, so that the walls have something to hold. You can just large enough to fit two marines space along the exterior of the building at once.
Step 2 Glue popsicle sticks
Start by slicing popsicle sticks width channels in each level. Next glue popsicles sticks in her place. This will give enough support for the structure as everything is glued together and doing fine. Once finished gluing popsicle sticks all leave to dry for 5-10 minutes.
Step 3 Glue structure together
This is where we make up busted floors. Make it so it is able to rest on both walls for more aid. Keep the walls perpendicular to each other and glue down the floor to the dries. This will allow the building to stand by itself. Make sure that the wall can stand up all by itself. Next glue based on the base station. Use the windows were cut off from the walls.
Step 4 Prime structure
Use acrylic paint in black building will base when the building. Its better to at the signing of the floors, so if you want to take a picture and there is an art.
Step 5 Make Rooftop base
Cut a base station that would fit the roof with the necessary sidewalls. After you have finished cutting the roof base glue the walls of the base year.
Step 6 Glue decorative pieces to base
This step provides beauty and characteristic of the base year. You can use the windows of the walls you cut in the first part of the project. Glue them in an appropriate manner at the base in any way you wish. Then leave to dry.
Step 7 Paint roof BASE
Acrylic black paint is what the use of the painting in the base. Make sure it is strong and can stand on its base before you begin painting.
Step 8 Create upper tower walls
These walls will be used for the cup. Be sure that the large windows in relation to the walls, so you ca clearly see that the bell outside. You can damage them a little if you want a devastated perspective. What do for me i like new way to look at the structure is not as boring as perfectly preserved buildings.
This will encourage you to do more areas in the search of your destroyed or slightly damaged bell tower cause they will never be a dull moment when you play with.